Turnigy Trackstar 80a Turbo Manual
I bought the above speedo a while ago and just got around to install it. Soldered the wires on and fitted it to a motor. When i switch on the power goes to the receiver and the steering servo works, but the speedo doe snot go into setup mode and all that happens is that the 3 led's flash.
May 20, 2013 Turnigy Trackstar 80 amp Turbo sensored esc. Forgot Password? Members List. Social Groups. Today's Posts. Mark Forums Read. Turnigy Trackstar 80 amp Turbo sensored esc. Thread Tools Search this Thread, 06:09 AM. Turnigy Trackstar 80a ESC/ Turnigy 4 pole 3520kv Turnigy TrackStar 150A brushless car esc. Add to EJ This esc made a great upgrade to the stock 80A esc in the Turnigy. Programming Turnigy Plush ESC. Turnigy Trackstar 80a Esc Manual, Babaji The Lightning Standing Still Pdf, Behringer Powerplay P16 M Manual, Canoscan N650u Twain Driver.
No button pressing changes this. Can anybody tell me what this means? It alos does this when i desolder the wires from the motor so i do not think it is a short or anything.
Load aster cracked skin. Thanks in advance. Just set the third one of mine up, are you sure you are pressing the setup button down? Use a 1.5 mm hex driver as they are fiddly.
As you can move the servo I am presuming you have bound the receiver to it? What tranny and receiver you using, I am sure someone had problems with a futaba with these ESC.
I did find the instructions on the web somewhere, but the hobbyking one does the trick. This is what I did switch tranny on press and hold set up button with 1.5mm hex driver switch on ESC, hold set up until yellow light comes on (few seconds) Leave tranny in neutral position yellow light is on, press set up button, light changes colour to red, pull full throttle, press set up button again, light changes to green, apply full brakes, press set up button again, then lights go back to yellow. Your done, switch of ESC to save settings hope you can get it sorted as I find these to be great ESC and have never let me down once, that's why I have them in three separate cars. Cheers Steve.
How to get the Turnigy TrackStar Turbo and Waterproof ESC Programming Box to work with Turnigy TrackStar Waterproof 1/8 Brushless Power System 2100/1900KV/120A The most important thing is figuring out how to attach to the ESC. After that, it works fine.
Sorry for the low light, but this will help you out if you have this ESC. Calman v5 keygen serial. Check out my other videos for a review of the trackstar brushless waterproof system in a Traxxas Summit. Programming Options (Waterproof ESC): Battery Type Operation Mode Initial Brake Drag Brake Motor Timing Acceleration Forward Limit Reverse Limit Drive Frequency Neutral Dead Band Reverse Rotation Restore Default Note: Suits Turnigy TrackStar Turbo and Waterproof 80A/120A ESCs PRODUCT ID.